A Fan WPA Education

Masters Degree Engineering Management

A Hands-On Approach to Solving Problems Helps a Distance Learner Spring into Engineering Management

When Gundolf Schmidt was born in 1969, his parents and older brother lived with his maternal grandmother in Germany. Until Mr. Schmidt was six that family closeness continued: His father was busy building a home in his nearby hometown, and that’s a slow process . . . but a rewarding one.

Emulating this parental example, Mr. Schmidt also built his own home after he was grown. Naturally, he got a fair amount of advice and help from his family.

That family tradition of hands-on interest in how things work has been the basis for a very successful technical career that recently led to a management position. He now serves as the engineering manager at a big Tier1 automotive supplier for a team of 31 located in Germany, the Czech Republic, and India. Throughout his explorations of learning and building, he has been blessed by having a beautiful wife who is very patient with his projects and hunger for knowledge.

This career success wasn’t completely planned. To some extent, it just happened.

After High School, Mr. Schmidt developed an interest in electronics and computers. To learn more, he enrolled in a school to prepare for work as an Informationselektroniker (which is similar to an electronic technician). Upon finishing the program, he had planned to attend the technological university. Opportunity intervened when his boss offered Mr. Schmidt an attractive job in the electronic design department of the company.

After two years, it was time for service in the German army’s signal corps where Mr. Schmidt learned a lot about communications technology. When he left the army, his employer was experiencing financial difficulties.

As a result, Mr. Schmidt took a job as a service technician for medical systems at another company. After a while, he was promoted to representative service manager. Although he was doing well, the job was wearing due to heavy travel across Germany.

Mr. Schmidt next decided he wanted to try his hand in the software environment and joined a small software systems house that was active in producing automotive applications. The company’s founder, Dr. Sammel, gave Mr. Schmidt the chance to work as a software engineer without formal qualifications.

Over the five years he was with the company, Mr. Schmidt took many courses to build his effectiveness and became quite knowledgeable about software development, programming languages, and quality assurance in software projects. He became a SPICE (ISO15504, Software Process Improvement and Capability dEtermination) assessor and an ISO 9000 internal auditor (European organization for quality — Quality Management Technician).

He also passed several training sessions in the CMM/CMMI (Capability Maturity Model / Integration) model. This education involved eight semesters of distance study while he was working that provided the equivalent of a Bachelor Of Science Degree.

In 2003, Mr. Schmidt joined Visteon, the former auto parts subsidiary of the Ford Motor Company. He was the software validation leader for a big automotive multimedia project developing Digital Audio Broadcast tuners for several car manufactures. In this role, he spent most of his time performing the validation process, analysis of errors, defect management and writing of software tools for automated testing, and in customer meetings.

In November 2004, Mr. Schmidt finished an important Training Course and qualified as an International Software Testing Qualifications Board certified tester (Foundation level). During recent years, he used his spare time to further improve his knowledge by learning some new software-languages e.g. C, C++, Java and Visual Basic and Reading Books about different bus-systems (e.g. CAN-BUS and so on) which are used in the automotive environment. For him, continuous improvement and learning new technologies are key factors in daily work.

Mr. Schmidt’s next foray into distance learning came in 2005 when he began a Master of Science program at Rushmore University. His goal for this education was to prepare for becoming a manager in the company. He found teaching people to be very interesting and was interested in how he could help his software group to improve its processes.

He selected Rushmore at this point in his career development because it offered distance learning, enabled him to study parallel to his daily work, and gave him the chance to earn his Master of Science degree in an acceptable amount of time. Another advantage was being able to take 12 credits in non-science courses so he could learn more about management practices while improving his English language skills. Rushmore also allowed him the freedom to take the specific courses of his own choice.

While at Rushmore, Mr. Schmidt was able to explore complex issues related to his work. For example, his American company developed software for European companies. As a result, both the CMMI and SPICE assessment models were of interest.

For one course, Mr. Schmidt mapped how CMMI translates into a SPICE perspective to help his company better understand its maturity and to save money. The result was a tool that helped improve his department’s processes.

In another course, Mr. Schmidt described powerful ways of performing software testing to be sure the new systems operate as intended. He further explored how quality staffs and software development teams can cooperate in more effective ways.

Rushmore professors also remember receiving frequent photographs from Mr. Schmidt showing progress reports while building his lovely new backyard pond as he worked on these tough courses. Obviously, the desire to build and learn is never ending for Mr. Schmidt.

Pushed by his professors, the technical work he accomplished exceeded Mr. Schmidt’s expectations. Through intensive work with Rushmore’s editing staff, Mr. Schmidt also felt that his English skills improved.

How did he feel about this distance learning experience?

“I feel proud and satisfied to have completed my M.Sc. while concurrently doing my job and building my house. I’ve learnt many valuable reading and writing techniques and also usable skills in the different environments based on my self-crafted course structure.

“The Rushmore program has provided me with what I expected: practical online learning, flexibility in terms of time, choice of courses and advisors, convenient payment options, visible progress, academic support and one-to-one mentoring.

“Maybe in the future I will start my PhD . . .”

Before graduating in 2006, Mr. Schmidt joined TRW in 2005 where he gained the position he now enjoys leading a global team of 31 as an engineering manager.

As he continues to learn and build, it’s clear that Mr. Schmidt’s best days are ahead of him.

About the Author

Donald W. Mitchell is a professor at Rushmore University. For more information about ways to engage in fruitful lifelong learning at Rushmore to increase your influence, visit

http://www.rushmore.edu .

Total Construction Project Management

$45.00

Suffering from chronic project headaches? Relief is on the way! PM pro George Ritz has written the prescription for the efficient, profitable, and headache-free management of any capital project. Total Construction Project Management combines the latest management innovations with tried-and-proven construction techniques to produce a cutting-edge “total system” guaranteed to give you complete co…

Happy About My Resume: 50 Tips for Building a Better Document to Secure a Brighter Future

$16.37

Many great job candidates have poor resumes that are merely a laundry list of job tasks that do little to distinguish them from their competition. The average recruiter or hiring manager spends less than 15 seconds reviewing a resume. Most people’s resumes fail to “wow” the reader and quickly end up in the “no” pile. Writing a resume can feel like an overwhelming task. It can seem like a Herculea…

Online option extends classroom.(includes related article on how Michigan State University’s online security master’s degree program was … An article from: Security Management

$5.95

This digital document is an article from Security Management, published by American Society for Industrial Security on May 1, 1999. The length of the article is 2673 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.From t…

Guide to the Engineering Management Body of Knowledge by Edition , 0

$56.99

Guide to the Engineering Management Body of Knowledge.

Master of Engineering by Luther, Evander [Paperback]

$89.22

Please note that the content of this book primarily consists of articles available from Wikipedia or other free sources online. A Master of Engineering (Magister in Ingeniaria) (abbreviated M.Eng, ME or MEng) or Master of Technology (abbreviated M.Tech or MTech) or Master of Science in Engineering (abbreviated M.Sc Engg or MSc(Engg)), can be either an academic or professional masters degree in the field of engineering. In Australia, the Master of Engineering degree is a research degree requiring completion of a thesis. Like the Master of Philosophy (M.Phil.), it is considered a lesser degree than Doctor of Philosophy (Ph.D.). It is not to be confused with Master of Engineering Science or Master of Engineering Studies which are coursework masters degrees. Exceptions are Monash University which awards a Master of Engineering Science by either research or coursework, the University of Melbourne which offers a Master of Engineering by coursework, and the University of Tasmania which offer a Master of Engineering Science by research. Author: Luther, Evander Binding Type: Paperback Number of Pages: 112 Publication Date: 2011/07/31 Language: English Dimensions: 9.02 x 5.98 x 0.27 inches

Essentials of Software Engineering

$125.7

Intended For A OneSemester, Introductory Course, Essentials Of Software Engineering Is A UserFriendly, Comprehensive Introduction To The Core Fundamental Topics And Methodologies Of Software Development. The Authors, Building Off Their 25 Years Of Experience, Present The Complete Life Cycle Of A Software System, From Inception To Release And Through Support. The Text Is Broken Into Six Distinct Sections, Covering Programming Concepts, System Analysis And Design, Principles Of Software Engineering, Development And Support Processes, Methodologies, And Product Management. Presenting Topics Emphasized By The IEEE Computer Society Sponsored Software Engineering Body Of Knowledge (SWEBOK) And By The Software Engineering 2004 Curriculum Guidelines For Undergraduate Degree Programs In Software Engineering, Essentials Of Software Engineering Is The Ideal Text For Students Entering The World Of Software Development. Author: Tsui, Frank F./ Karam, Orlando Binding Type: Paperback Number of Pages: 384 Publication Date: 2006/10/01 Language: English Dimensions: 9.12 x 7.42 x 0.77 inches

Engineering Management by Compton, W. Dale Edition ILL, 1

$107.99

Engineering Management by Compton, W. Dale

Engineering Management by Chang, C M Edition ILL, 1

$43.99

Engineering Management by Chang, C M

Healthcare Management Engineering (Paperback)

$86.38

This Briefs Series book illustrates in depth a concept of healthcare management engineering and its domain for hospital and clinic operations. Predictive and analytic decision-making power of management engineering methodology is systematically compared to traditional management reasoning by applying both side by side to analyze 26 concrete operational management problems adapted from hospital and clinic practice. The problem types include: clinic, bed and operating rooms capacity; patient flow; staffing and scheduling; resource allocation and optimization; forecasting of patient volumes and seasonal variability; business intelligence and data mining; and game theory application for allocating cost savings between cooperating providers. Detailed examples of applications are provided for quantitative methods such as discrete event simulation, queuing analytic theory, linear and probabilistic optimization, forecasting of a time series, principal component decomposition of a data set and cluster analysis, and the Shapley value for fair gain sharing between cooperating participants. A summary of some fundamental management engineering principles is provided. The goal of the book is to help to bridge the gap in mutual understanding and communication between management engineering professionals and hospital and clinic administrators. The book is intended primarily for hospital/clinic leadership who are in charge of making managerial decisions. This book can also serve as a compendium of introductory problems/projects for graduate students in Healthcare Management and Administration, as well as for MBA programs with an emphasis in Healthcare.

Related Blogs

Written by admin

April 16th, 2010 at 5:25 pm

Posted in Masters Degree

Tagged with education, learning, masters, masters degree engineering management, mba, mit, online masters degree engineering management

You must be logged in to post a comment.

Masters Degree Engineering Management

A Hands-On Approach to Solving Problems Helps a Distance Learner Spring into Engineering Management

Related Blogs